Phidget IR.lvlib:IRTransmit.vi

Transmits a code

• code data is transmitted MSBit first.
• MSByte is in array index 0 of code
• LSBit is right justified, therefore, MSBit may be in bit position 0-7 (of array index 0) depending on the bit count.

1055_0 (ver: 100, 101) IR Receiver Transmitter : Supported

status status is TRUE (X) if an error occurred or FALSE (checkmark) to indicate a warning or that no error occurred. Right-click the error in control on the front panel and select Explain Error or Explain Warning from the shortcut menu for more information about the error.

code code is the error or warning code. Right-click the error in control on the front panel and select Explain Error or Explain Warning from the shortcut menu for more information about the error.

source source describes the origin of the error or warning. Right-click the error in control on the front panel and select Explain Error or Explain Warning from the shortcut menu for more information about the error.

Code Code

bitCount Number of bits in the code

encoding Encoding technique used to encode the data Enumeration Values Name Value Supported Devices 1055_0 v100 v101 IR_ENCODING_UNKNOWN 1 ✓ IR_ENCODING_SPACE 2 ✓ IR_ENCODING_PULSE 3 ✓ IR_ENCODING_BIPHASE 4 ✓ IR_ENCODING_RC5 5 ✓ IR_ENCODING_RC6 6 ✓

length Constant or Variable length encoding Enumeration Values Name Value Supported Devices 1055_0 v100 v101 IR_LENGTH_UNKNOWN 1 ✓ IR_LENGTH_CONSTANT 2 ✓ IR_LENGTH_VARIABLE 3 ✓

gap Gap time in microseconds

trail Trail time in microseconds. Can be zero for no trail

header[0] Header pulse and space. Can be zero for no header

header[1]

one[0] Pulse and Space times to represent a '1' bit, in microseconds

one[1]

zero[0] Pulse and Space times to represent a '0' bit, in microseconds

zero[1]

repeat[0] A series or pulse and space times to represent the repeat code. Start and end with pulses and null terminate. Set to 0 for none.

repeat[1]

repeat[2]

repeat[3]

repeat[4]

repeat[5]

repeat[6]

repeat[7]

repeat[8]

repeat[9]

repeat[10]

repeat[11]

repeat[12]

repeat[13]

repeat[14]

repeat[15]

repeat[16]

repeat[17]

repeat[18]

repeat[19]

repeat[20]

repeat[21]

repeat[22]

repeat[23]

repeat[24]

repeat[25]

minRepeat Minium number of times to repeat a code on transmit

dutyCycle Duty Cycle in percent (0.1-0.5). Defaults to 0.33

carrierFrequency Carrier frequency in Hz - defaults to 38kHz

toggleMask[0] Bit toggles, which are applied to the code after each transmit

toggleMask[1]

toggleMask[2]

toggleMask[3]

toggleMask[4]

toggleMask[5]

toggleMask[6]

toggleMask[7]

toggleMask[8]

toggleMask[9]

toggleMask[10]

toggleMask[11]

toggleMask[12]

toggleMask[13]

toggleMask[14]

toggleMask[15]

toggleMask[16]

toggleMask[17]

toggleMask[18]

toggleMask[19]

toggleMask[20]

toggleMask[21]

toggleMask[22]

toggleMask[23]

toggleMask[24]

toggleMask[25]

toggleMask[26]

toggleMask[27]

toggleMask[28]

toggleMask[29]

toggleMask[30]

toggleMask[31]

toggleMask[32]

status status is TRUE (X) if an error occurred or FALSE (checkmark) to indicate a warning or that no error occurred. Right-click the error out control on the front panel and select Explain Error or Explain Warning from the shortcut menu for more information about the error.

code code is the error or warning code. Right-click the error out control on the front panel and select Explain Error or Explain Warning from the shortcut menu for more information about the error.

source source describes the origin of the error or warning. Right-click the error out control on the front panel and select Explain Error or Explain Warning from the shortcut menu for more information about the error.